Up: RELEASE NOTES
Previous: Release of 16 May
This is a list of desired program changes, fixes or enhancements. Note
that the list is not all that well maintained, so some items may have
been addressed, but not taken out here.
- Add a SUNAVOID parameter sort of like DODOWN that avoids pointing
and antenna too close to the Sun. Request for the CMVA from
Krischbaum Mar. 22, 2011.
- Somehow provide for different VLA positions for single dish
and phased array in the VEX file when mixing the two. Dec. 8,
- Deal with VEX source positions when using satellite position
calls for every scan/station. RCW July 22, 2009
- Warn about PCCOR not able to run when only 1 tone per band. RCW
Jan 13, 2009. Requested by Kogan.
- Have plot option to distinguish sources in XY plots by color.
RCW Sept. 11, 2008.
- Add aperture array axis type and whatever is needed to support it
to the station catalog. July 1, 2008 email request from
- Make sure leap seconds are updated.
For SLALIB, update dat.f. (That takes care of planets too).
For the satellite tracking, update the kerfile (naifnnnn.tls) in the
ephemeris area ($PLANET_DATA).
Keep this entry in the Wish List permanently. Apr 8, 2008 RCW
- Put information about frequency agility into SCHED. Dec 06 EVN TOG.
- Make EVLA apply to the FE settings. Or better yet, somehow
describe the EVLA frequency setup. Sept. 27, 2007. RCW.
- Check for broken links in external references. There are some
as of Sep. 19, 2007. RCW
- Warn if DOPPLER is not used when it looks like it should be.
From Leonia (as contact) Aug 1, 2007. RCW.
- Try to name runlog after the observation. Maybe a rename. It
is opened before the input is read so the code is not yet known.
but could it be renamed later - or a new file opened and the
contents copied over. From Amy. 25 Jan 2007. RCW.
- Improve optimization when switching bands. emails from Greg Taylor and
Steven Tremblay, early October 2006.
- Write to screen the typing instructions in config mode. Now uses
WRTMSG and only goes to runlog. Nov 29, 2006.
- Improve specification of multiple pass processing. And force
specification when it is clear that multiple pass will be needed.
Analysts May 4, 2006. See email from lfoley for details.
- Put the grab time stuff in for Walter. See $SCHED/vlbagrab.txt
- Need new OBSTYPE or get rid of OBSTYPE. Old note Jan 26, 2006.
As of Oct 2008, I've forgotten the reason for this so I don't
know what should be added.
- Source dependent elevation limits for configuration studies.
Request by Pat Crane. Aug 2. 2004 RCW
- Put an Az/El raster option in Sched. From note Jul 2004 RCW
- Take into account GBT band change time. From note Jul 2004 RCW
Discussed at Jodrell in Nov 2004. This will probably take a
matrix input for each agile station.
- Get FIFMIN and MAX for user setups VLA and VLBA. From note, Jul
2004 RCW. This has to do with sensing when you get outside the
- Do more for VLBA4 DAR; Add SiO to VLA freq.dat; Turn off pcal
at VLA. From note, Jul 2004 RCW
- High resolution RD plots of Mars vs orbiters affected by
diurnal parallax. Also planet not plotted if start point not on
field. From note, Jul 2004 RCW.
- Calculate range of acceptable dates based on solar distance for
dynamically scheduled projects. From Mat Lister 6/17/2004.
- If PCALs are turned off, then back on, warn that they do not
return to the same phase. 24 Nov 2003 RCW.
- The VLA has a filter in front of P band that cuts it off at
305 and 335 MHz. SCHED is not aware of it. Fix that. 24 Sep 2003
RCW. (consult Ken Sowinski) Maybe don't use the "front end
filter at all since this other filter is earlier and is only
- Plotting: For beam, get beam size and some sidelobe statistics.
21 Feb 2002 RCW.
- Allow control of peakup channel when using autopeak. 21nov2001
- Deal with DSN patching scheme. Also Mark IV geodetic patching.
15 Oct 2001 RCW.
- The various DAR types need better documentation. 19sep2001 RCW.
For example, VLBAG is not documented.
- Have some scheme to test for allowed band switching at antennas
that have partial capabilities. This is coming on the EVN.
Also deal with availability of more than one receiver at a band.
21 June 2001 RCW.
- When two aliases are used for the same source in a schedule, there
are some oddities. A .vex file ends up with two source sections,
of which one is empty. The plotting acts like there are two sources,
but all the plotted info is under one of them. 4 Apr 2001. RCW.
- Model frequency change times now that more antennas are getting
multiple band capability. For example, on GBT it is time to
point to zenith, 1 minute to rotate, and point again - up to
9 minutes. Switching from Gregorian to prime focus is about
5 minutes. So far SCHED assumes either that it happens so
fast that is doesn't really matter (VLBA) or so slow that it
is not done during an observation (manual box change).
- Check reasonableness of requested correlator average time for
Socorro correlator. Tavg=speedup*.131072*n.
- Calculate data rates with mixed integration times. Will need
stations specified. 13dec99 RCW.
- Make a USUBA input file if there is any subarraying.
- Add an optimizing mode for startup pointing that cycles through
the frequencies as fast as possible. Perhaps takes highest
elevation source for each setup as it cycles through setups.
- Add LEVEL to scan parameters. 27may98 RCW and Bryan Butler.
It is already a setup parameter.
- Warn of times of low fringe rate when the pulse cal tones
might correlate. 15apr98 RCW.
- Warn about CALCODE=G meaning the pulsar gate will be used.
From paper note 8apr98 RCW
- Add PCAL tone frequency check. Early97
- Networks: For stations that don't have pulse cal injectors (eg VLA),
use pulse cal detectors to get state counts. 23jan98.
- Networks: Add checks related to special requirements at many stations.
An example is the need for time for peaking scans at GB.
- MarkIV: Calcodes and Qualifiers need to get to correlator either
directly or through all station logs. The field system
stations don't do it now. They probably should. Nov97.
- VLA: Have a better model of slew times. Probably need to account
for actions happening on 10s LST boundaries. Also know setup times.
Might be needed for phase referencing. 8may98. RCW.
- VLA: Some sort of DWELL time scheduling for VLA phasing
is needed. Basically, deal with slew times to calibrators. Early97.
- VLA: Support fast switching. Early97
- VLA: Need horzontal parallax for PM card. Can get from
- VLA: Add all other VLA cards for fully capable VLA scheduling.
- VLA: Cannot use frequency catalog for VLA only observations.
Can this be changed? 3Jul97 RCW.
Up: RELEASE NOTES
Previous: Release of 16 May